Water footprint calculator
The PureField water footprint calculator is a free tool that works out a site's yearly water footprint as blue and grey water using the Water Footprint Network method, with harvested rainwater counted as blue. You enter the water withdrawn and discharged and the effluent parameters; the total and the ISO 14046 water scarcity footprint (AWARE) appear on screen. A detailed report arrives as a PDF by email.
How it is calculated
- 1
Blue water
Withdrawn freshwater includes rainwater harvested from roofs and paved surfaces; the part that returns to the catchment is subtracted. A site that withdraws 20,000 m³ and sends 16,000 m³ to the sewer has 4,000 m³ of blue water. The part of blue water that came from rainwater is shown on its own line.
- 2
Grey water
The pollutant load is divided by the gap between the receiving water's quality standard and its natural concentration. 10,000 m³ of effluent with 120 mg/L COD against a 25 mg/L standard is 48,000 m³ of grey water. The parameter with the highest value sets the result.
- 3
Water scarcity (AWARE)
Blue water is multiplied by the country's AWARE factor. For non-agricultural use in Türkiye the factor is 22.24: consuming 1 m³ there has the scarcity impact of about 22 m³ under world-average conditions.
- 4
Where the method comes from
Water Footprint Network (Hoekstra et al. 2011), Franke et al. (2013) for grey water, ISO 14046 and WULCA AWARE (Boulay et al. 2018) for water scarcity.
Questions
How is a water footprint calculated?
What is the difference between blue, green and grey water?
What should I enter as c_max?
What does the AWARE factor mean?
How do I get the PDF report, and is my data stored?
The water footprint tool in the Tools section of the PureField panel uses the same method and AWARE values and saves every calculation to history. See pricing or Try free for 7 days.
